Product properties
After curing it is white, permanently flexible, resistant to humidity and temperature from -15°c to +60c. It contains no solvents, and it is odourless and environmentally friendly. For indoor use; for both horizontal and vertical surfaces (it does not drip). The ‘aqua’ acrylic assembly adhesive is used for bonding decorative elements made of ps (eps), foam (except pe and pp), gypsum, mdf, cork, and materials of similar type, i.e. Stuccowork, slats, sections, rosettes, ceiling panels, wall panels, screens, tiles, emblems, and info plates to the following materials: concrete, plaster, gypsum, wood, plasterboards, and another porous substrates.
Application
The substrate should be clean, dry and degreased. Remove the cap, cut the tip of the cartridge, put on the applicator and cut at an angle. Working temperature from + 10 ° C to +40 ° C. Apply on both sides, in dots or stripes, and then join and press the glued elements. At least one of the surfaces must be porous, absorbent. Secure against displacement.
